NCH POUND
MIL-DTL-46192C(MR)
28 August 1998
SUPERSEDING
MIL-A-46192B(MR)
1 July 1991
DETAIL SPECIFICATION
ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK),
WELDABLE (ALLOY 2519)
This specification is approved for use within the Department of the
Army, and is available for use by all Departments and Agencies of the
Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers aluminum alloy 2519 armor rolled plate
from 1/2 inch up to and including 4 inches in thickness.
1.2 Weldability. The material covered by this specification is weldable to
itself and other weldable 2000 series alloys using a 2000 series filler and is
weldable to 6000 series alloys using a 4000 series filler. It is not weldable
to 5000 series or 7000 series alloys by conventional welding techniques.
1.3 Classification. Material furnished under this specification should be
rolled plate in a T87 temper
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3
and 4 of this specification. This section does not include documents cited in
other sections of this specification or recommended for additional information
or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether
or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards, and handbooks form a part of this document to the extent specified
herein. Unless otherwise specified in the contract or purchase order, the
issues of these documents are those listed in the issue of the Department of
Defense Index of Specifications and Standards (DODISS) and supplement thereto,
cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: Director, US Army Research Laboratory, Weapons and Materials
Research Directorate, ATTN: AMSRL-WM-M, Aberdeen Proving Ground, MD 21005-
5069 by using the Standardization Document Improvement Proposal (DD from
1426) appearing at the end of this document or by letter.
I
AMSC N/A
FSC 9535
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business