MS27798B
REQUIREMENTS:
1. Material shall be one of the following:
a. Brass strip - Alloy C23000 per ASTM B36/B36M, temper half hard.
b. Copper strip - ASTM B152/B152M, cold rolled, temper O60 or O68, or hot rolled, temper 025.
2. Letter suffix on part number shall indicate material required: "B" for brass strip or "C" for copper strip.
3. Material shall be tinned on both sides with IPC J-STD-006, SN 60 or SN 63 solder.
4. Material shall be supplied on a reel or spool suitable for protection, storage, and use. Reel or spool shall be identified with MS no. and dash no.
5. Material shall have no burrs, creases, or wrinkles. NOTES:
1. Dimensions in inches unless otherwise noted.
2. For design feature purposes this standard takes precedence over procurement documents referenced herein.
3. Referenced documents shall be the issue in effect on the date of invitation for bids or request for proposal.
4. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of changes.
Custodian: Preparing activity: Navy - AS DLA - IS
(Project 9535-2010-001)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business