MIL-DTL-32505
1.3.1 Class I. Class I is wrought aluminum armor that conforms to the Aluminum Association
designation for the 7017 aluminum alloy. The applicable gauge range for Class I is 0.500 - 4.000
inches.
1.3.2 Class II. Class II is wrought aluminum armor that conforms to the Aluminum Association
designation for the 7020 aluminum alloy. The applicable gauge range for Class II is (to be
determined) inches.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-662
-
V50 Ballistic Test for Armor
(Copies of these documents are available online at https://quicksearch.dla.mil/.)
2.3 Non-Government publications. The following documents form a part of this specification to
the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
THE ALUMINUM ASSOCIATION, INC.
AA H35.2
-
American National Standard Dimensional Tolerances for
Aluminum Mill Products
(Copies of these documents are available online at https://www.aluminum.org).
ASTM INTERNATIONAL
ASTM B557
-
Standard Test Methods for Tension Testing
Wrought and Cast Aluminum and Magnesium-
Alloy Products
ASTM E34
-
Standard Test Methods for Chemical Analysis of
Aluminum and Aluminum-Base Alloys
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business