MIL-DTL-32505
REQUEST FOR BALLISTIC TEST OF ALUMINUM ALLOY 7017 / 7020 ARMOR
FIRING RECORD:
DATE:
Plate MANUFACTURER / PRODUCER:
PRIME CONTRACTOR:
Name:
Name:
Address:
Address:
POC:
POC:
Phone No:
Phone No:
Fax No:
Fax No:
SPECIFICATION: MIL-DTL-32505
REVISION: AMENDMENT:
ATC PROJECT NO:
CONTRACT NO:
BALLISTIC TEST CONTRACT NO:
DCAS REGION:
TEST ITEM IDENTIFICATION:
Lot No.
Plate No.
Ordered
Alloy and Temper
Class:
Thickness
PURPOSE: ___ Acceptance
___ First Article
___ Development
SAMPLE: ___ Primary
___ Retest (Firing Record No. of Failed Sample__________________)
CHEMICAL ANALYSIS: OTHERS: Mn+Cr:
Zr+Ti:
Al :
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Zr
Ni
Other, max.
Each
Total
MECHANICAL PROPERTIES: AA7017/AA7020 Density :
UTS (ksi):
0.2% YS (ksi):
Elongation (%):
WELDABILITY: Thickness:
Striking Velocity: Required:
Actual:
Pass / Fail
Thickness:
Striking Velocity: Required:
Actual:
Pass / Fail
BALLISTIC TEST RESULTS:
Test
Projectile
Obl. Actual Thickness Required Actual
Pass/
Notes
V50 (fps) V50 (fps)
(deg)
(in)
Fail
Reduced Testing
Audit Testing
LOTS REPRESENTED BY:
Lot [ met ] [failed to meet ]
the ballistic requirements of specification MIL-DTL-32505.
Government Representative
Date
Supplier Representative
Date
FIGURE 1. Aluminum Armor Test Data Form.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business