MIL-DTL-46027K(MR)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every
effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of
this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless
otherwise specified (see 6.2), the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-662
-
V50 Ballistic Test for Armor
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise indicated (see 6.2), the
issue in effect on the date of invitation for bids or request for proposal should apply.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B209
-
Standard Specification for Aluminum and Aluminum-Alloy
Sheet and Plate (DoD adopted)
ASTM B557
-
Standard Test Methods for Tension Testing Wrought and
Cast Aluminum and Magnesium-Alloy Products (DoD
adopted)
ASTM E34
-
Standard Test Methods for Chemical Analysis of
Aluminum and Aluminum-Base Alloys (DoD adopted)
ASTM E227
-
Optical Emission Spectrometric Analysis of Aluminum and
Aluminum Alloys by the Point-to-Plane Technique
(DOCUMENT WITHDRAWN BY ASTM IN 2002)
ASTM E607
-
Standard Test Method for Atomic Emission Spectrometric
Analysis of Aluminum Alloys by the Point-to-Plane
Technique, Nitrogen Atmosphere (DoD adopted)
ASTM E716
-
Standard Practices for Sampling Aluminum and Aluminum
Alloys for Spectrochemical Analysis
ASTM E1251
-
Test Method for Analysis of Aluminum and Aluminum
Alloys by Atomic Emission Spectrometry (DoD adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business