MIL-DTL-46118E(MR)
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation (see 6.2).
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-662 - V50 Ballistic Test for Armor
(Unless otherwise indicated, copies of federal and military specifications,
standards, and handbooks are available from the Defense Automated Printing
Service (DAPS), Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094).
2.2 Non-Government publications. The following documents form a part of
this specification to the extent specified herein. Unless otherwise
specified, the issues of the documents which are DoD adopted are those listed
in the issue of the DoDISS cited in the solicitation. Unless otherwise
specified, the issues of documents not listed in the DoDISS are the issues of
the documents cited in the solicitation (see 6.2).
SOCIETY OF AUTOMOTIVE ENGINEERS, Inc. (SAE)
AMS 2750 - Pyrometry (DoD adopted)
AMS 2772 - Heat Treatment of Aluminum Alloy Raw Materials
(Application for copies should be addressed to the Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI H35.2 - Dimensional Tolerances for Aluminum Mill Products
(DoD adopted)
(Application for copies should be addressed to the American National Standards
Institute, ATTN: Customer Service, 11 West 42nd Street, New York, NY 10036).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B557
- Tension Testing Wrought and Cast Aluminum and
Magnesium-Alloy Products (DoD adopted)
ASTM
E34
- Chemical Analysis of Aluminum and Aluminum-Base Alloys
(DoD adopted)
ASTM
E227 - Optical Emission Spectrometric Analysis of Aluminum and
Aluminum Alloys by the Point-to Plane-Technique
(DoD adopted)
ASTM
E607 - Optical Emission Spectrometric Analysis of Aluminum and
Aluminum Alloys by the Point-to-Plane Technique,
Nitrogen Atmosphere (DoD adopted)
ASTM
E716 - Sampling Aluminum and Aluminum Alloys for
Spectrochemical Analysis
ASTM
E1251 - Optical Emission Spectrometric Analysis of Aluminum and
Aluminum Alloys by the Argon Atmosphere, Point-to-Plane,
Unipolar Self-Initiating Capacitor Discharge
(DoD adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business