INCH-POUND
MIL-DTL-46063H
14 September 1998
SUPERSEDING
MIL-A-46063G
30 December 1992
DETAIL SPECIFICATION
ARMOR PLATE, ALUMINUM ALLOY, 7039
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers 7039 wrought aluminum alloy armor
plate. The nominal thickness of armor plate covered by this specification is
1/2 inch to 4 inches, inclusive (see 3.7 and 6.2).
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections
3 and 4 of this specification. This section does not include documents in other
sections of this specification or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards, and handbooks form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those listed
in the issue of the Department of Defense Index of Specifications and Standards
(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-662 - V50 Ballistic Test For Armor
(Unless otherwise indicated, copies of the above specifications, standards, and
handbooks are available from the Defense Automated Printing Service (DAPS),
Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Director, US Army Research Laboratory, Weapons and Materials Research
Directorate, ATTN: AMSRL-WM-M, Aberdeen Proving Ground, MD 21005-5069 by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at
the end of this document or by letter.
AMSC N/A
FSC 9535
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business