MIL-DTL-46077G
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129
-
Military Marking for Shipment and Storage
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in
the solicitation or contract.
U.S. ARMY TEST AND EVALUATION COMMAND (USATECOM)
TOP 2-2-710
-
Ballistic Tests of Armor Materials
ITOP 4-2-805
-
Projectile Velocity and Time of Flight Measurements
(Application for copies should be addressed to the Defense Technical Information Center, 8725
John J. Kingman Road, Suite 0944, Fort Belvoir, VA 22060-6218.)
2.3 Non-Government publications. The following documents form a part of this specification
to the extent specified herein. Unless otherwise indicated, the issue in effect on date of
invitation for bids or request for proposal should apply.
American Society for Quality Control (ASQC)
ASQ Z1.4
-
Procedures, Sampling and Tables for Inspection by Attributes
(DoD Adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business