MIL-DTL-46192C(MR)
APPENDIX A
TABLE A-IV.
Minimum required ballistic limits - 20 mm fragment
simulating projectile at 0 degrees obliquity - 2519 alloy
(continued).
_______________________________________________________________________________
Thickness
Required
Thickness
Required
Thickness
Required
(inches)
BL(P) fps
(inches)
BL(P) fps
(inches)
BL(P) fps
1.510
2857
1.550
3013
1.590
3178
1.515
2876
1.555
3033
1.595
3199
1.520
2895
1.560
3053
1.600
3220
1.525
2914
1.565
3074
1.605
3242
1.530
2934
1.570
3094
1.610
3263
1.535
2953
1.575
3115
1.615
3285
1.540
2973
1.580
3136
1.620
3307
__1.545
2993
1.585
3157
1.625
3329_______
* Specification requirements begin for ordered thickness 0.951 inch.
** Specification requirements end for ordered thickness l.500 inches.
Note: Tabulated values on either side of the specification requirements are for
interpolation of BL(P) requirements on undersize or oversize plates.
- 21 -
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business